ROWENTA ROBOT EXPLORER Serie 80 Vacuum Cleaner

ROBOT EXPLORER Serie 80 Vacuum Cleaner
The smartest robot* for tailor-made cleaning
The Rowenta Explorer Serie 80 Robot Vacuum Cleaner puts tailor-made cleaning performance within reach, for an easy-to-use automatic cleaning solution that leaves your entire home spotless. Discover the perfect automatic vacuum cleaner package: high-precision navigation, cutting-edge technology, and a highly intuitive user-friendly interface including smartphone app and voice assistant compatibility, adding an unprecedented level of quality to your personalized cleaning experience.

Référence : RR7747WH

*By Rowenta 

The Rowenta EXPLORER Serie 80 Robot Vacuum Cleaner

Bringing together advanced technology with user-friendly controls, the Rowenta EXPLORER Serie 80 Robot Vacuum Cleaner is an expert cleaning solution that covers your entire home with total ease. Discover a go-anywhere automatic vacuum cleaner that delivers ultra-accurate navigation and personalized settings, saving time through an easy and intuitive user-friendly experience. Cutting-edge technology is matched by performance: the Aqua Force system mops the floor while vacuuming, a high-performance filter is ideal for people who suffer from allergies, and so much more. Discover dependable deep-cleaning results made effortless with the Rowenta Robots app (for iOS and Android), voice-assistant compatibility (Google Assistant, Amazon's Alexa) and automatic WiFi connectivity.

Technical specifications / comparison

Technology Rotative central brush  
Type of brush Hair brush  
Lateral brush 2  
Motorization Universal motor  
Cleaning modes Auto, Spot  
Power levels 3  
Vacuum efficiency 2-3  
Your habits Automatic and effortless cleaning  
Multi-room management    
Obsctacles management Laser camera  
Stairs management Yes: 3 drop sensors  
Virtual barrier Yes: via Application  
Type of navigation Smart (camera and laser)  
Home mapping    
Wifi connectivity (app Rowenta robots and vocal assistants)    
Battery type Lithium ion  
Recharging time 3 hours  
Autonomy 120mn(ECO)-90mn(STAND)-60mn(BOOS  
Running time (min position) 120 min(ECO)  
Recharging type Docking station  
Charge and Go    
Control system Yes: application  
Dust container capacity 0.70  L
Filtration High performance filter  
Talking robot No  
Others Vacuuming and mopping at the same time  
Sound Level 72  dB(A)
Dimensions ( ...x...x...) 34x34x9,7  cm
Colours White  
Type of plug EUR  
Additional included accessories Water tank, mop  
Allergy care    



The robot app is exclusively for smartphones.
Our products are compatible with all operators and the majority of the boxes on the market.
You can connect your product to any WEP, WPA and WPA2 type WiFi on the 2.4GHz frequency band.

Your product cannot connect to a 5GHz WiFi.
WiFi with a password containing special characters will not work as well as open WiFi (not requiring a password).
iOS only: Go to the setting of your smartphone, and check that your smartphone is connected to your home Wi-Fi.
Your home Wi-Fi must have an internet connection.
Please check the following elements:
a) 5GHz network?
Your smartphone might use 5 GHz network, and the produt cannot detect it.
Solution: your smartphone can stay on the 5GHz network, but the product must be connected to 2.4GHz. Therefore, you should select here a 2.4GHz network for the product. The pairing will work even you will go back to the 5GHz network.

Make sure your wireless router is either 2.4GHz or a dual band router that is configured to support 2.4GHz. The product does not support the 5GHz band only.

b) Hidden network name?
If your network is 'hidden', then you can type manually the SSID (network name) by pressing "Enter SSID".
In "Settings" on the right side of your home screen, you must choose the "WiFi settings" and "activate WiFi".
Then select your WiFi network and enter your password.
Here is the list of the most common problems and solutions by the frequency order.

  1. Pairing succeeded but the appliance isn't connected: if you see in the app that your appliance isn't connected, close and reopen the app.

    If you still don't see the appliance after this action,
    - RR72xxx & RG72xxx products: put the robot out of its docking station and press the button 3 seconds. If you want to make another association with another phone, you may have to press the button several times to make it blink in orange.
    - RR74xxx & RG74xxx products: restart the robot by using the switch next to the dust bin.
    - RR77xxx products: restart the robot by using the switch below the robot.

  2. Wi-Fi connection: check the Wi-Fi password and type carefully.

  3. Keep your smartphone close to the appliance and the modem until the end of the pairing process.

  4. Access Point Android: make sure that you keep the connection to the appliance if you see a confirmation message. This message can appear twice during the pairing process.

  5. Access Point iOS: after several attempts, restart your smartphone.

  6. Access Point iOS: during the connection to the appliance, a popup will appear to ask you to connect to the "SEB_ACCESS_POINT" network. Press "Join".

  7. Access Point: when you activated the access point,
    - RR72xxx & RG72xxx products: does the LED flash orange + double beep?
    - RR74xxx & RG74xxx products: does the Wi-Fi light flash quickly + beep?
    - RR77xxx products: is the Wi-Fi light flashing?

    If not, try again.

  8. Access Point Android: after several attempts, remove the network "SEB_AccessPoint" from your smartphone setting if you see it.

  9. Access Point Android: some smartphones have an option in the Wi-Fi settings to avoid the connection to a Wi-Fi which has no internet connection.

    For the pairing, please deactivate this option so that the smartphone allows the connection to the appliance. This option is identified in Xiaomi smartphones such as Pocophone F1 and Redmi note 8.

  10. Internet connection: be sure that the appliance that you are about to pair does not need a proxy.

  11. Android: you must allow the geolocation.

  12. Internet connection: check that you select a 2,4 GHz network in your Wi-Fi setting, not 5 GHz to connect your appliance.

  13. Connection to the cloud: check if the automatic reconnection to your home Wi-Fi is correct.

  14. Connection to the cloud: activate the mobile data of your smartphone.

  15. After several attempts: restart the Wi-Fi modem.

  16. After several attempts: unplug, wait for 20 seconds, and re-plug the appliance.
    If the problem is still present, reset the appliance (hard reset).
Several possible reasons exist:
• You didn't enter the correct email address for the account. Please verify.
• You didn't enter the correct password. To reset, request a temporary password by email and then change the password in the app's Menu.
Check to see if your device is compatible: Compatibility list
Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it.
This location must be free of any obstacles (including rugs). Leave at least 1,5 metre of space free to the left and the right, and 2 metres at the front of the base station. If the station is placed in a corner or difficult to find, the robot vacuum cleaner will not be able to reach it.
Place the base station's power cable along the wall.
For more information, refer to the instructions in your user manual.
Leave the charging base station plugged in permanently (the automatic recharge function will not be available if the charging station is not activated).
Yes, your robot vacuum cleaner is equipped with drop sensors that detect stairs and gaps.
However, in some situations, the sensors are not as efficient. For example, curved staircase edges, rugs next to stairs, slippery surfaces and obstructions might affect the sensors' performance.
Before running the robot vacuum cleaner ensure space has no obstacles, power cords, clothing, or other potentially dangerous objects which might cause the appliance breakdown or other accidents.
The robot vacuum cleaner Serie 80 has 3 navigation modes:
• "Permanent map" (to personalize your cleaning per room)
• "No-go zones" (to define in which zone the robot shouldn't go)
• "Spot" (to clean a localised area)
To send the robot back to its docking station press the "Home" button on the robot.
If the robot starts the cleaning from the docking station, it will return to the docking station.
Always keep the robot vacuum cleaner on the docking station, while you are not using it.
If you plan not to use the robot for a long time, fully charge and then take the battery out of the robot (make sure the robot is switched off when you take the battery out). Store them in a cool dry place. Recharge the battery every 3 months.
Do not use your appliance. In order to avoid any danger, you must have them replaced by an approved vacuum repair company.
Do not use your appliance. To avoid any danger, do not touch the terminals. You must unplug the charging station and have it replaced by an approved vacuum repair company.
Empty the dust container into a bin after each use. Clean the dust compartment seals with a cloth.
It is recommended to clean the central brush once a week.
For more details, please refer to the User Manual.
It is recommended to clean the filters at least once a week.
For more details, please refer to the User Manual.
It is necessary to clean left, right and front wheels regularly to remove entangled hair and threads.
It is recommended to wipe sensors and charging terminals (of the robot and charging base) with a clean dry cloth once a week.
Turn off the robot before cleaning the sensors and charging terminals.
Do not use any cleaning products to clean the robot vacuum cleaner.
For some parts you can use the water, for the others you can use the dry cloth only. For more details, refer to the instruction manual.
It is recommended to replace the fine dust and foam filter every 6 months.
The side brushes should be replaced by new every 6 months.
You can perform the following checks:
• Put the main power switch onto STOP and then onto START.
• Unplug the cable and then plug it into the charging station again.
• Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully.
• Check to see if there is any obstacle such as a reflective object, a chair, etc. near the charging station.

If after these different checks, the automatic charging still does not work properly, have your robot vacuum cleaner checked by an approved vacuum repair company.
• If the dust container is full.
• The cleanliness of the filters.
• If there is an object or rubbish which may be obstructing the suction hole underneath the robot.
Several possible reasons exist:
• If the robot did not start from its docking station, it will not return to it. In this case, the robot will return to its starting point.
• If the robot vacuumed in Spot mode, the robot will return to its starting point.
• If the robot is lifted up and put back down on the floor, it will try to relocate itself. If it can't, it will return to its starting point.
Check the following:
• The charging station must not be installed on a rug.
• The charging station must not be exposed to sunlight or near a heat source.
• The free space to the side and the front of the charging station adheres to the instructions in the user manual.
• The plug is correctly connected to the charging station.
• The charger cable is connected to the power supply.
• There are no obstructing objects around the charging base.
• There are no objects near the charging station terminals.
• The charging station is activated (LED indicator is green).

If after checking these elements, the robot still cannot find the base station, contact an approved vacuum repair company.
You can perform the following actions:
• Turn off and then turn on the main power switch.
• Unplug the cable and plug it again into the charging station.
• Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully.
• Check if there is no obstacle such as a reflective object, a chair, etc. near the charging station.

If after these steps, the automatic charging still does not work well, contact an approved vacuum repair company.
This is a regular case. The vacuum cleaner can remain connected to the docking station without any risk.
Caution: use only designated charger.
Check the following:
• If the switch underneath the robot is correctly in the 'ON' position.
• If the display is lit up. If not, charge up the robot on the base station.
Check the following:
• There are no obstucting objects under the wheels.
• The robot is not blocked due to differences in the floor level.
• There is no error message displayed. (see the troubleshooting and error codes section in your user manual)
You can perform the following actions:
• Make sure there are no obstructing objects within 10 cm of the staircases/gaps.
• Wipe up the sensor windows with a dry cloth.

If after these steps, the problem persists, please contact an approved vacuum repair company.
Make sure that the brush is not obstructed. Clean the brush from entangled hair and threads.
If the brush is damaged, replace it with a new one.
Flashing light and sound signal indicates an error.
For more details about the error description and solution, refer to User Manual.
You can perform the following actions:
• Check if the intake channel is not obstructed.
• Check if the dust bin is well fitted.
• Empty the dust bin if it is full.
• Remove the central brush and clean it.
• Check if the filter is not saturated.

If after these steps, the problem persists, please contact an approved vacuum repair company.
The power-brush safety feature is activated when the robot identifies a risk.

Two situations may occur:
• The power-brush gets stuck: the robot attempts to free it and stops the vacuuming and the power-brush.
• The robot will try to free the brush: if it can't, it will turn off and you will have to clear it manually.

If the power-brush gets stuck in thick carpeting due to its long and/or thick fibers, or the robot has vacuumed the carpet for a long time, the power-brush will stop turning and the robot will continue vacuuming without it.
The robot may experience certain problems represented by error codes.
For more details about the error codes description and solution, refer to User Manual.
The filter may be inserted incorrectly. Try positioning the filter correctly into the slot on its holder.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
1. Check to see if your robot is properly connected to your wireless network (robot's Wi-Fi light on).
If not, turn the robot off and then back on with the “ON/OFF” switch located under the robot while it's within range of your wireless network.

If the light is still off, this can be for several reasons:
• The robot may be off or not have enough battery charge.
• The robot is outside the range of your Wi-Fi network.
• You changed the password for your Wi-Fi network. The robot is thus no longer connected to your Wi-Fi network. You must reboot your robot and then reconnect it.
• The robot's internal software failed to update correctly. Follow the app's step-by-step instructions.

2. The robot's Wi-Fi light is on, but the app is not able to connect.
Your smartphone is not connected to the Internet (Wi-Fi or 3G/4G network).
This is normal, because you are connected to the product, which has no internet connection.
For certain smartphones, after it is connected to the product Wi-Fi, you may see a message asking you to confirm that you want to stay on this network which has no internet connection. You have to answer that you want to connect to this network anyway for the association to be successful.
No, the appliance is designed for indoor use only.
Yes, the robot vacuum cleaner's sensors do not require the light to process the cleaning session.
The robot vacuum cleaner is efficient on the hard floor surfaces, including tile, parquet, laminate, vinyl, and carpets not thicker than 1,5cm.
Yes, it is recommended to use the robot vacuum cleaner to maintain the cleanliness, but there are still surfaces where the robot does not perform as efficient as non-robotic vacuum cleaners.
Yes, you can schedule a single cleaning session or set up a daily cleaning function through the mobile application.
The robot is limited to one program per day in order to ensure optimum cleaning of all accessible rooms.
Yes. The robot will switch to sleep mode when it is fully recharged.
Yes, the robot can be charged on the charging station, even when the robot's main power switch is turned off.
Yes, the robot will automatically return to the charging base when the battery is low during cleaning.
Once charging is complete, the vacuum cleaner will restart the cleaning process.
This is because the robot didn't start from its docking station: since the robot returns to its starting point, it will go back to where it began vacuuming in Spot mode.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
The robot vacuum cleaner Serie 60 and Serie 80 have 3 power modes: Silent, Normal and Boost.
You also can activate different power modes in the mobile application.
It will take 3 hours to charge an empty battery.
The robot can run up to 90 min before its battery is low.
You can share your robot by having each person download the Rowenta robot app and follow the connection instructions.
In order for your smartphone to detect your Wi-Fi around you, the application needs the location permission as required by Google.
If you don't allow this permission, your smartphone won't be able to find your product, and not be able to continue the pairing.
This information will not be used or stored.