With the Nomad clipper, say good-bye to unsightly nose and ear hair.
Featuring high-quality stainless steel blades and a 360° rotary system, trimming is safe and pain-free, yielding neat results every time. Boasting up to three hours of autonomy and equipped with a protective safety cap, Nomad keeps you looking your best.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
After every use you should clean the blades using the cleaning brush provided. If necessary, you may also use a slightly damp cloth. For more thorough cleaning of the blades, some models allow you to remove the blades completely.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims. The various lengths are as follows: • Position 1 = 0.8 mm • Position 2 = 1.1 mm • Position 3 = 1.4 mm • Position 4 = 1.7 mm • Position 5 = 2.0 mm