ROWENTA WET AND DRY

WET AND DRY
PERFECT CUTTING EXPERIENCE EVEN UNDER THE SHOWER

The superior-performance Wet & Dry hair and body clipper delivers precise, perfect results every time. Equipped with a high-power motor, a titanium-coated blade and a long-lasting battery, it provides an efficient, convenient trimming experience even under the shower.

Référence : TN5100F0

PERFECTLY TRIMMED HAIR, WET OR DRY

The Wet & Dry hair and body clipper combines superior cutting performance and maximum convenience.

Thanks to its high-quality titanium-coated moving blade, hair is cut in a single go, saving you time and effort. At the same time, two high-precision adjustable combs coupled with a 2 mm precision setting yield perfectly desired results every time.

Ideal for grooming even under the shower, thanks to our Wet & Dry technology and a long-lasting battery, it's easily stored away in a compact carry pouch, as an ideal traveling companion.

Technical specifications / comparison

CUTTING PERFORMANCE
Blade material Stainless steel  
Blade coating Titanium  
Motor type DC motor  
Motor speed (rpm) 6500  
Speed settings 1  
PRECISION
Minimum cutting length 0.5  mm
Precision setting 2  mm
Cutting length indicator Comb  
Zones Hair + body  
USAGE - CUTTING STYLES
Hair blade size 42  mm
Hair comb type Adjustable  
Hair comb 2  
Hair cutting length adjustment range 0.5 to 29  mm
Hair cutting length positions 15  
Autonomy 45 min  
Charging time 12  h
Power Cordless use  
Battery type NiMh  
COMFORT OF USE
Detachable cutting head    
Cleaning Fully washable  
Charging indicator LED  
Storage Pouch  
Technical specifications
Colours Black + Grey  
Voltage 100-240  V
Wet & dry use    

Documentation

FAQ

No. It is advisable not to use the clippers on yourself - this is for safety reasons and also to ensure a better finish.
No. The clippers cannot recharge and be in use at the same time.
It is advised to use the hair clippers on clean but dry hair.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
After every use you should clean the blades using the cleaning brush provided. If necessary, you may also use a slightly damp cloth. For more thorough cleaning of the blades, some models allow you to remove the blades completely.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
No. For rechargeable models, you must use NiCd or NiMH rechargeable batteries. Do not use normal batteries, as they run the risk of melting.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
A Class I appliance must be earthed (and has only one insulation layer). A Class II appliance does not necessarily have to be earthed because it has two distinct and independent insulation layers.
No. Our clippers can only be used on hair. Any other use may lead to the deterioration of the appliance or injury.
If the clipper is rechargeable, the battery will last for 40 minutes after a full charge.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims.
The various lengths are as follows:
• Position 1 = 0.8 mm
• Position 2 = 1.1 mm
• Position 3 = 1.4 mm
• Position 4 = 1.7 mm
• Position 5 = 2.0 mm
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.