The superior-performance Airforce Precision beard trimmer delivers precise, perfect results every time. Say goodbye to clean-up, thanks to Rowenta's exclusive vacuum technology that guarantees up to 90% of hair is collected. Ultra-sharp titanium-coated blade and a high-speed motor ensure effortless trimming in a single go.

Référence : TN4800F0


Airforce Precision beard trimmer offers ultimate cutting performance and Rowenta's exclusive vacuum technology for a consistently perfect beard without the clean-up. An ultra-sharp titanium-coated blade and a 7500 rpm motor provide an effortless cut in a single go.

Time is further saved by advanced vacuum technology based on a powerful turbine, which collects up to 90% of trimmed hair - perfect for use anytime, anywhere.

With twenty different cutting lengths and a 0.5 mm ultra-precision setting, your beard is styled exactly how you want it, while a long-lasting lithium ION battery guarantees your Airforce Precision is always ready.

Technical specifications / comparison

Blade material Stainless steel  
Blade coating Titanium  
Blade technology V-Sharp technology  
Motor type DC motor  
Motor speed (rpm) 7500  
Speed settings 1  
Minimum cutting length 0.5  mm
Precision setting 0.5  mm
Cutting length indicator Adjusting wheel  
0,5 mm  
Zones Beard  
Micro setting adjustment Micro setting adjusting wheel  
Beard comb type Adjustable  
3 day beard function    
Beard cutting length adjustment range 0.5 to 10 mm  
Beard cutting length positions 20  
3 day beard  
45 min  
Powerful and long-lasting (Li-Ion)  
Autonomy 45 min  
Charging time 1.40  h
Power Cordless + corded use  
Battery type Lithium ion  
Detachable cutting head    
Charging indicator LCD  
Technical specifications
Colours White  
Voltage 100-240  V



No. It is advisable not to use the clippers on yourself - this is for safety reasons and also to ensure a better finish.
No. The clippers cannot recharge and be in use at the same time.
It is advised to use the hair clippers on clean but dry hair.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
After every use you should clean the blades using the cleaning brush provided. If necessary, you may also use a slightly damp cloth. For more thorough cleaning of the blades, some models allow you to remove the blades completely.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
No. For rechargeable models, you must use NiCd or NiMH rechargeable batteries. Do not use normal batteries, as they run the risk of melting.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
A Class I appliance must be earthed (and has only one insulation layer). A Class II appliance does not necessarily have to be earthed because it has two distinct and independent insulation layers.
No. Our clippers can only be used on hair. Any other use may lead to the deterioration of the appliance or injury.
If the clipper is rechargeable, the battery will last for 40 minutes after a full charge.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims.
The various lengths are as follows:
• Position 1 = 0.8 mm
• Position 2 = 1.1 mm
• Position 3 = 1.4 mm
• Position 4 = 1.7 mm
• Position 5 = 2.0 mm
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.