ROWENTA PRO STYLE IS3440

PRO STYLE IS3440
For a professional steaming at home

Professional steaming always at hand

Rowenta ProStyle  garment steamer easily removes creases on all type of fabric, including the most delicate, thanks to its adjustable steam output. Thanks to its exclusive and patented support, results are even better ! The perfect tool to refresh & sanitize all kinds of garments, as well.

Référence : IS3440D1

HIGH-EFFICIENCY STEAMING NOW AT HOME

Rowenta Prostyle Garment Steamer smoothes wrinkles and removes creases from any fabric with utmost ease

Suitable for both last minute touch ups and intensive steaming sessions, this high-efficiency steamer is a great time-saver with a start-up time of just 45 seconds. There's no need now for an ironing board or endless trips to the dry cleaner. Compact in size, yet highly efficient, this steamer is equipped with features for exceptional convenience and ease-of-use, and can also be used to refresh or sanitize sofas, curtains and sheets, in addition to garments. A exclusive and patented vertical support for easy steaming with only one hand. A removable watertank means no more steam hose length constraint. Benefiting from 1800W of intense power and a steam output of 30 g/min for deep diffusion through the fibers, this garment steamer will save you both time and energy.

Technical specifications / comparison

Power 1800  
Steam output 30  g/min
Heat-up time 45  s
Sanitize YES  
Water tank capacity 1,5  L
Autonomy 50  min
Anti scale function Draining system  
Brushes Thick brush  
Bonuses Curtain Press & Steam, x2 pant clips, glove, Lint Pad  
Colours Black & Silver  

Documentation

FAQ

Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.