EXTREM' AIR MOTION

Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).

Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it.
This location must be free of any obstacles (including rugs). Leave at least 1,5 metre of space free to the left and the right, and 2 metres at the front of the base station. If the station is placed in a corner or difficult to find, the robot vacuum cleaner will not be able to reach it.
Place the base station's power cable along the wall.
For more information, refer to the instructions in your user manual.

Before running the robot vacuum cleaner ensure space has no obstacles, power cords, clothing, or other potentially dangerous objects which might cause the appliance breakdown or other accidents.

Yes, the robot can be charged on the charging station, even when the robot's main power switch is turned off.

Check that the switch underneath the robot is correctly in the 'ON' position.

In Random mode, recharging is managed in an automatic way.
Automatic charging will take place whenever the battery is weak. The robot will connect itself to the automatic recharge terminal.
Once the robot is automatically connected to the charging station, check the status of the LED display to ensure charging is being carried out correctly.

In Smart mode, recharging is managed in an automatic and intelligent way.
Automatic charging will take place each time cleaning is finished or when the battery is weak. The robot will connect itself to the automatic recharge terminal.
Once the robot is automatically connected to the charging station, check the status of the LED display to ensure charging is being carried out correctly.

In Smart mode, the robot moves one way which allows it to vacuum each area once only.
This is ideal for daily cleaning and for barely furnished and/or empty rooms.

In Random mode, the robot moves in a random way until the battery runs out.
This is ideal for intensive cleaning and for fully furnished and/or cluttered rooms.

In Spot mode, the robot carries out a spiral movement of about 1 metre in diameter in order to intensively clean a space as previously defined.
Ideal for localised cleaning.

Yes, by using the remote control in manual mode. The robot moves about as required by remote control with the help of the arrow keys. Please refer to the user instructions to use the robot in this mode.

Yes, you can program the robot so that it vacuum cleans at specific moments, even when you are not at home. Please refer to the user instructions to use the robot in this mode. A daily cleaning function at a given time is even possible.

Yes, by pressing the "MUTE" button on your remote control.
To cancel the Mute function, press the "MUTE" button again on your remote control.

No, the carpets and rugs cannot be more than 1.5 cm thick. Cleaning cannot be carried out if the carpets or rugs are dull or dark. The side brush cannot function correctly on carpets and may damage them.

Select a lower level of suction power.

It is necessary to charge it up for 3 hours and 30 mins.

Place the virtual barrier box about 30 cm in front of the place where you would like to limit access. Place it in the direction of the arrow where you wish to create the Virtual Barrier and make sure that there isn't anything blocking it in front. The opposite side of the virtual barrier box must be in contact with a physical wall. Keep the virtual barrier at some distance from the charging station (more than 3m). If the virtual barrier is installed near it, the signal from the virtual barrier will block access to the charging station and the robot will not be able to return to it.
Do not use more that two virtual barriers at the same time. Moreover, the use of several virtual barriers for a small surface area can cause the appliance to malfunction.
For more information, refer to the instructions in your user manual.

The side brushes should be replaced by new every 6 months.

If the anti-dust filter (HEPA filter) is dirty, lightly tap on the filter cassette while holding it over your bin in order to remove excess dust. Clean it with a vacuum cleaner or a soft brush.
Warning: Do not put the filter under water. Water can damage the motor.

Remove the foam filter (located behind the HEPA filter), gently wash it under running water and leave it to dry for at least 12 hours before placing it back again in its compartment.

When you notice that suctioning is less effective, clean the HEPA filter or replace it if it is in poor condition.

Several possible reasons exist:
• If the robot did not start from its docking station, it will not return to it. In this case, the robot will return to its starting point.
• If the robot vacuumed in Spot mode, the robot will return to its starting point.
• If the robot is lifted up and put back down on the floor, it will try to relocate itself. If it can't, it will return to its starting point.

You can perform the following actions:
• Turn off and then turn on the main power switch.
• Unplug the cable and plug it again into the charging station.
• Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully.
• Check if there is no obstacle such as a reflective object, a chair, etc. near the charging station.

If after these steps, the automatic charging still does not work well, contact an approved vacuum repair company.

Check the following:
• If the switch underneath the robot is correctly in the 'ON' position.
• If the display is lit up. If not, charge up the robot on the base station.

Flashing light and sound signal indicates an error.
For more details about the error description and solution, refer to User Manual.

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

Your robot can run in a range of languages (French, Spanish, Italian, English, Dutch, German or Portuguese) depending on the model. To select your language, press the "LANG" button on your remote control.

Check the following elements:
• The charging station must not be on a rug.
• The charging station must not be exposed to sunlight or near a heat source.
• The free space to the side and the front of the charging station is adhered to according to the instructions in the user manual. If not, move the charging station or the objects in the way.
• Is the round plug connected correctly to the charging station? If not, plug the charger's round plug into the charging station.
• Is the charger cable connected to the power supply? If not, connect the charger to the power supply.
• Is there an object near the charging base station? If so, remove any objects around the charging station.
• Are there any objects near the charging station terminals? If so, remove all objects on the charging station terminals.
• Is the charging station deactivated (led "power" red)? If so, activate the charging station by connecting it to the power supply.
• If the virtual barrier is in place, is it placed at a distance from the charging station (more than 3m)? This is because if the virtual barrier is installed near it, the signal from the virtual barrier blocks the charging station and the robot will not be able to return there.

If after checking these elements, the robot still cannot find the base station, have it checked over by an approved vacuum repair company.

Check:
That the switch underneath the robot is correctly in the 'ON' position.
That the display is lit up. If not, charge up the robot on the base station.
That the robot is charged up enough. If not, change the batteries in the remote control.

The charging station or your robot is not working. Take your robot vacuum cleaner to an approved vacuum repair company.

• Have you completely removed the protective plastic film?
• Have you placed the batteries in the casing of the virtual wall?
• Have you carefully followed the instructions on how to set up the virtual wall in your user manual?

Take your robot vacuum cleaner to an approved vacuum repair company.

The dust container has not been detected. Check if the dust container has been inserted correctly.

The battery is weak. Recharge the robot.

The operation of the sensors which prevent the robot from falling is malfunctioning. Clean the anti-fall sensor windows located under the robot.

The operation of the shutter is malfunctioning. Check that nothing is blocked in the shutter.

The operation of the sensors behind the front window is malfunctioning. Clean the front windows.

The operation of the gyro sensor is malfunctioning. Switch off and start up again.

The operation of the wheel motors is malfunctioning. Check that there isn't anything stuck in the wheels.

The charging device is malfunctioning. Switch the robot and the charging station off. Clean the charging station terminals underneath the robot and the charging base terminals and then start it up again.

The operation of the side brushes is malfunctioning. Check that there isn't anything caught in the brushes.

The operation of the suction motor is malfunctioning. Initially, check that nothing is blocking the suction hole. Then switch it off and start it up again 10 minutes later.

Yes, it is recommended to use the robot vacuum cleaner to maintain the cleanliness, but there are still surfaces where the robot does not perform as efficient as non-robotic vacuum cleaners.

The robot is limited to one program per day in order to ensure optimum cleaning of all accessible rooms.

This is because the robot didn't start from its docking station: since the robot returns to its starting point, it will go back to where it began vacuuming in Spot mode.

Take your device to a recycling center or waste disposal facility.

If you believe a part is missing, please contact our customer service center and we will help you find an appropriate solution.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Guarantee section of this website.

The virtual barrier allows the robot's cleaning areas to be limited.