User manual and frequently asked questions X-Clean 10, Wet Dry Cordless Vacuum Cleaner, Long Run Time, Self Cleaning and Drying
The best of cleaning at a glance
Référence : GZ7540WO
Voir les documents liés
Documentation
Voir les questions les plus fréquentes
FAQ
After one pass, it takes about 3 minutes to dry.
There is no need to vacuum, the X-Clean can vacuum and wash solid and liquid waste.
If there is a large amount of dry debris on the floor, you can vacuum first to avoid filling the tank of the X-Clean too quickly.
If there is a large amount of dry debris on the floor, you can vacuum first to avoid filling the tank of the X-Clean too quickly.
Yes, you can use water up to a maximum of 50°C. Beyond that, the heat can damage the washer’s seals and reduce its durability.
The X-Clean washer can be used on all types of smooth floors: waxed concrete, tiles, terracotta, PVC, linoleum, parquet.
For parquet or more delicate floors, don't hesitate to use modes with a low water flow to avoid soaking them.
We recommend testing the appliance on a small area for delicate floors when using it for the first time.
Refer to product safety and use instructions.
Do not use on carpets, walls, windows or floors sensitive to water.
Product is not designed for outdoor use.
For parquet or more delicate floors, don't hesitate to use modes with a low water flow to avoid soaking them.
We recommend testing the appliance on a small area for delicate floors when using it for the first time.
Refer to product safety and use instructions.
Do not use on carpets, walls, windows or floors sensitive to water.
Product is not designed for outdoor use.
No, it doesn’t : it is specially designed to clean your hard floors without causing any damage.
However, we recommend testing the device on a delicate area during the first use.
Refer to product safety and use instructions.
However, we recommend testing the device on a delicate area during the first use.
Refer to product safety and use instructions.
We do not recommend using the X-Clean washer on carpets.
Even though they can pick up dirt, washers wet fabrics, which can leave marks or promote bacterial growth.
The recommended use for our washer remains hard floors.
Even though they can pick up dirt, washers wet fabrics, which can leave marks or promote bacterial growth.
The recommended use for our washer remains hard floors.
Our X-Clean ranges cannot be used without water and with dry vacuuming.
To use the X-Clean washing vacuum cleaner, the clean water tank must be filled.
On the X-Clean 10 model, you can still use the "Suction" mode, which reduces the water flow to the minimum for minimal moistening of the floor.
To use the X-Clean washing vacuum cleaner, the clean water tank must be filled.
On the X-Clean 10 model, you can still use the "Suction" mode, which reduces the water flow to the minimum for minimal moistening of the floor.
Even if the washer is compatible with most household cleaners on the market, this remain optionnal.
You are responsible for this; please follow these instructions:
Prefer multi-surface detergents suitable for various types of floors. Use solutions with mild surfactants. Do not use products containing bleach, pure bleach, or corrosive agents. Do not use foaming cleaning products (carpet shampoo, black soap, dishwashing liquid). Do not use acid-based cleaners, such as certain bathroom products. These are too harsh and may corrode the vacuum mop’s metal components. Do not use greasy (e.g., black soap), toxic, flammable, aggressive, or particle-containing products. Adding household detergents to the water tank is done at your own risk. Using incompatible detergents may damage and cause your device to malfunction. This could cause a product dysfunction.
You are responsible for this; please follow these instructions:
When using detergents, always follow the dosage recommended by the manufacturer to avoid residue on the floor and to ensure quick drying.
Overdosing the detergent may damage your device and cause it to malfunction.
Overdosing the detergent may damage your device and cause it to malfunction.
The X-Clean 10 washing vacuum cleaner is equipped with anti-winding technology that effectively cleans hair and fur, which will go directly into the dirty water tank.
The X-Clean washing vacuum cleaner automatically recharges when you put it back on its base, which must be plugged in.
Once fully charged, the appliance will turn off automatically, there is no need to unplug your base.
Once fully charged, the appliance will turn off automatically, there is no need to unplug your base.
To adjust or turn off voice assistance, your device must be placed on its base, and :
• For language switching: press the MODE + Self-Cleaning buttons briefly & simultaneously, repeat until the correct language is found
• For volume modification: keep pressing the MODE button for 2 seconds
Detail in the image below :

• For language switching: press the MODE + Self-Cleaning buttons briefly & simultaneously, repeat until the correct language is found
• For volume modification: keep pressing the MODE button for 2 seconds
Detail in the image below :

The specific instructions for changing the volume of the voice function may vary by device.
• For your X-clean 10, on its charging base press 2s on the image below to change the volume.

• For your X-clean 10, on its charging base press 2s on the image below to change the volume.

Start the self-cleaning and drying of your device when charging by pressing like on image.


Long press the vocal assistant button on the side of the product for 3 seconds to enter the voice selection mode.
Then, short press the vocal assistant button to switch languages, until you hear yours (22 languages available).
Wait 3 seconds for language validation.
Then, short press the vocal assistant button to switch languages, until you hear yours (22 languages available).
Wait 3 seconds for language validation.
It's important to do this immediately after using your appliance.
It's very simple and only takes a few seconds. It cleans the brush by removing accumulated dirt and wringing it out.
After this self-cleaning, we recommend that you place the brush to be dried on the drying rack provided.
It's very simple and only takes a few seconds. It cleans the brush by removing accumulated dirt and wringing it out.
After this self-cleaning, we recommend that you place the brush to be dried on the drying rack provided.
After each self-cleaning cycle, it is important to empty both of your appliance's tanks.
However, it is not necessary to wash the roller and the rest of the appliance.
For this step, we recommend (depending on your frequency of use and type of dirt vacuumed) that you wash your roller once a week.
However, it is not necessary to wash the roller and the rest of the appliance.
For this step, we recommend (depending on your frequency of use and type of dirt vacuumed) that you wash your roller once a week.
Brush wear depends mainly on the surface of the floor. If your home is covered only with tiles, the brushes will last longer than those used on rougher surfaces such as terracotta or concrete.
In all cases, you'll notice with the naked eye when the bristles on your brush start to get damaged.
The average recommendation is to change your roller every 6 months.
In all cases, you'll notice with the naked eye when the bristles on your brush start to get damaged.
The average recommendation is to change your roller every 6 months.
No, the roller is not compatible with the washing machine, which could damage it and then damage your appliance.
If your roller is dirty, and you want to wash it more thoroughly, we recommend that you wash it under the tap with washing-up liquid, and then rinse it thoroughly to remove any residue.
If your roller is dirty, and you want to wash it more thoroughly, we recommend that you wash it under the tap with washing-up liquid, and then rinse it thoroughly to remove any residue.
Take your device to a recycling center or waste disposal facility.
If you believe a part is missing, please contact our customer service center and we will help you find an appropriate solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
We do not currently offer a rental service for this device. You can buy it directly from us or from our partners.

