The Nomad precision trimmer combines accuracy with perfectly customized results.
With two precision combs and a 20 mm precision blade, facial hair is expertly trimmed, shaped and maintained, even in the most hard-to-reach areas. Featuring a long-lasting titanium coated blade, the Nomad is also 100% waterproof, for easy cleaning. Rounding it all off, the enclosed battery ensures up to 3 hours of use, meaning your beard will always look its best.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
After every use you should clean the blades using the cleaning brush provided. If necessary you may also use a slightly damp cloth. For more thorough cleaning of the blades some models allow you to remove the blade completely.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims. The various lengths are as follows: Position 1 = 0.8 mm Position 2 = 1.1 mm Position 3 = 1.4 mm Position 4 = 1.7 mm Position 5 = 2.0 mm