The Expertise Vision trimmer keeps your beard looking its best. Its sharp titanium-coated blade, high-speed motor and ultra-precise settings provide perfectly desired results every time, even under the shower, while an ingenious LED illuminates trimming for precise, harmonious results.

Référence : TN3450F0


The perfect beard,
every time

Expertise Vision is the ideal companion to a well-trimmed beard.

Thanks to a high-speed motor and long-lasting titanium-coated blade, your beard is effortlessly trimmed in a single go. Thirty different cutting lengths, an ultra precise 0.5 mm setting and a special beard comb ensure perfectly desired results, while an ingenious LED illuminates the trimming area for precise, harmonious results. For added convenience, integrated Wet & Dry technology allows for trimming even under the shower, while a long-lasting battery with a two-light LED charge indication makes for a stress-free grooming session.

Technical specifications / comparison

Blade material Stainless steel  
Blade coating Titanium  
Blade technology Ultra-Sharp  
Motor speed (rpm) 6500 / 7300  
Speed settings 2  
Turbo speed    
Minimum cutting length 0.5  mm
Precision setting 0.5  mm
Cutting length indicator Comb  
Vision function    
Zones Beard  
Micro setting adjustment High precision comb  
Beard blade    
Beard blade size 32  mm
Beard comb type Micro setting  
3 day beard function    
Beard cutting length adjustment range 0.5 - 15 mm  
Beard cutting length positions 30  
Autonomy 90 min  
Charging time 12  h
Power Cordless use  
Battery type NiMh  
Detachable cutting head    
Cleaning Fully washable  
Charging indicator LED  
Storage Pouch  
Technical specifications
Colours Blue / silver  
Voltage 100-240  V
Wet & dry use    



No. It is advisable not to use the clippers on yourself - this is for safety reasons and also to ensure a better finish.
No. The clippers cannot recharge and be in use at the same time.
It is advised to use the hair clippers on clean but dry hair.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
After every use you should clean the blades using the cleaning brush provided. If necessary, you may also use a slightly damp cloth. For more thorough cleaning of the blades, some models allow you to remove the blades completely.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
No. For rechargeable models, you must use NiCd or NiMH rechargeable batteries. Do not use normal batteries, as they run the risk of melting.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
A Class I appliance must be earthed (and has only one insulation layer). A Class II appliance does not necessarily have to be earthed because it has two distinct and independent insulation layers.
No. Our clippers can only be used on hair. Any other use may lead to the deterioration of the appliance or injury.
If the clipper is rechargeable, the battery will last for 40 minutes after a full charge.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims.
The various lengths are as follows:
• Position 1 = 0.8 mm
• Position 2 = 1.1 mm
• Position 3 = 1.4 mm
• Position 4 = 1.7 mm
• Position 5 = 2.0 mm
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.