Best home mapper, best dust tracker

The Rowenta Smart Force™ Cyclonic Explorer is an automatic vacuum cleaner that delivers exceptional dust pick-up performance for a robot vacuum cleaner on all types of floors. Ensuring high-precision navigation, cutting-edge technology comes together with a highly intuitive, user-friendly interface featuring smartphone app connectivity and the new permanent mapping feature for an unprecedented cleaning experience.

Référence : RR8155WH

Among Rowenta robot vacuum cleaner


The Cyclonic Explorer
Automatic Vacuum Cleaner

Best home mapper, best dust tracker

For ultimate convenience with exceptional results on any surface, the Rowenta Smart Force™ Cyclonic Explorer automatic vacuum cleaner combines cyclonic technology and an active motorized brush for best-in-class robot vacuum cleaner dust pick-up performance on all floors. This go-anywhere vacuum cleaner is equipped with highly sophisticated Robart technology, with a camera and laser combination that produces expert navigation anywhere you need it, for smooth and safe cleaning that avoids walls and furniture or falling down stairs. Brushless motor technology completes this long-lasting product, ensuring optimum results in a compact format, with performance that’s built to last. Experience full control and convenience with smartphone connectivity featuring interactive activity reports, while a high-performance Lithium battery provides a runtime of up to 60 minutes.

Technical specifications / comparison

Technology Rotative central brush  
Type of brush Hair brush  
Cyclonic technology    
Motorization Brushless motor  
Power levels 3  
Multi-room management    
Obsctacles management Laser camera  
Stairs management Yes: 3 drop sensors  
Virtual barrier Yes: via Application  
Battery type Lithium ion  
Running time (min position) 60  
Recharging time 3h  
Recharging type Docking station  
Charge and Go    
Control system Yes: application  
Dust container capacity 0,3  L
Sound Level 80  dB(A)
Transportation handle    
Dimensions ( ...x...x...) 30x14  cm



Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it.
This location must be free from any obstacles (including rugs). Leave at least 1 metre of space free to the left and the right and 2 metres at the front of the base station. If the station is placed in a corner or if it is difficult to find, the robot vacuum cleaner will not be able to reach it.
Place the base station's power cable along the wall.
For more information, refer to the instructions in your user manual.
Leave the charging base station plugged in permanently (the automatic recharge function will not be available if the charging station is not activated).
Place the virtual barrier box about 30 cm in front of the place where you would like to limit access. Place it in the direction of the arrow where you wish to create the Virtual Barrier and make sure that there isn't anything blocking it in front. The opposite end of the virtual barrier box must be in contact with a physical wall. Keep the virtual barrier at some distance from the charging station (more than 3m). If the virtual barrier is installed near it, the signal from the virtual barrier blocks the charging station and the robot will not be able to return there.
Do not use more that two virtual barriers at the same time. Moreover, the use of several virtual barriers for a small surface area can cause the appliance to malfunction.
For more information, refer to the instructions in your user manual.
Do not use your appliance. In order to avoid any danger, you must have them replaced by an approved vacuum repair company.
Do not use your appliance. To avoid any danger, do not touch the terminals. You must unplug the charging station and have it replaced by an approved vacuum repair company.
Empty the dust container into a bin after each use. Clean the dust compartment seals with a cloth.
You can perform the following checks:
Put the main power switch onto STOP and then onto START.
Unplug the cable and then plug it into the charging station again.
Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully.
Check to see if there is any obstacle such as a reflective object, a chair, etc. near the charging station.
If after these different checks, the automatic charging still does not work properly, have your robot vacuum cleaner checked by an approved vacuum repair company.
If the dust container is full.
The cleanliness of the filters.
If there is an object or rubbish which may be obstructing the suction hole underneath the robot.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by connecting another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and contact the customer service.
The virtual barrier allows the robot's cleaning areas to be limited.