ROWENTA Clean & Steam

Clean & Steam
Perfect cleaning in half the time

 

Clean & Steam is the innovative solution to keep floors clean while saving you time. Thanks to its exclusive suction head, floors are first vacuumed, then steam cleaned, all in a single movement. The result is outstanding, healthy and perfectly adapted to your type of hard floor.

Référence : RY7535WH

Where to buy

*U&A - Home Cleaning 2013- France/ Italy/ Germany

*on 'min' position

ProductBenefits

2 in 1: wash and vacuum floors in a single go!

We spend on average 34 minutes vacuuming our floors every week, and a further 31 minutes washing them*. Clean & Steam is the innovative combination of a highly efficient handstick cleaner and a steam mop. No more time wasted vacuuming, then mopping: with Clean & Steam, a single once over will leave your hard floors spotless.

 

 

A well-made head

The exclusive DUAL CLEAN & STEAM suction head is designed to follow the natural back-and-forth movement of the vacuum. Thanks to this innovative system the dust is always removed from the floor before steam cleaning.

Perfect performance for a long-lasting cleaning

Unlike classic filters that get clogged, the Advanced Cyclonic Technology provides a high level of air and dust separation for long-lasting cleaning results.

Healthy cleaning

CLEAN & STEAM eliminates up to 99% of bacteria and germs using only tap water.

Perfect steam adapted to the type of floor

Depending on the type of floor (parquet, tiling, vinyl, etc.), the user can change the steam flow to a more appropriate setting.

Good for the floor and the environment

Detergent-free: no more need to use chemicals.

Ready even for lengthy cleaning sessions!

Equipped with a removable water tank of a 0.7 liter capacity, you can clean up to 40 min*, or 100 m2*, without having to refill with water.

PERFECTLY CLEAN FLOORS ALL IN ONE GO!

Clean & Steam is an innovative appliance that leaves floors spotless and saves you time. In a single movement, floors are vacuumed then steam cleaned, eliminating up to 99% of bacteria while leaving your home healthier and detergent-free. Its Advanced Cyclonic Technology provides a high level of air and dust separation, for long-lasting cleaning results, while the adjustable steam flow adapts perfectly to any type of hard floor.

Technical specifications / comparison
Clean & Steam
Clean & Steam
Performance
Corded category Corded Steam Cleaner  
Technology Cyclonic Technology  
Power 1700  
Motorization By Pass motor  
Steam settings YES(min/medium/max)  
Autonomy
Steam running time up to 40min  
Heating time 30 sec  
Steam ready indicator    
Equipement
Microfiber mop All floors  
Microfiber mop - quantity 2  
Rest mat    
Dust container/bag capacity 0,4  L
Water tank capacity 0,7  L
Removable water tank    
Recommended consumable kit ZR0058 01  
Water filtration Anti Calc filter*1  
ergonomics
Power cord length 7.5  m
Telescopic tube    
Parking position    
Sound Level 84  dB(A)
Loop handle    
Dimensions/weight
Dimensions (LxWxH) 259x272x1210  mm
Weight 5,4  kg
Design
Colours Black & silver  

Documentation

Download Safety instructions

Download Safety instructions
Download manual

Download manual
Warranty information

Warranty information

FAQ

No, you must not add detergent to the tank.
No, you must not add perfume or essential oils to the tank.
Your appliance lets you choose between two steam levels:
- 'Eco' position: for floors such as laminated/varnished parquet, rug/carpet*, stone/marble.
- 'Max' position: for floors such as tiled/vinyl.
* Only for models equipped with carpet glider.

Note: These recommendations should be respected in order to avoid damaging the floors.
• We recommend that you check the floor manufacturer's instructions for use and precautions. It is advisable to test the surface area to be cleaned before starting.
• For soft floor coverings (carpets, rugs), allow the sprayed area to dry first to ensure that no colour change or deformation occurs.
Detach the lid of the dust container and remove the foam filter, throw it away and install the new one.
To clean the head, first detach the wipe holder and then the head from the device body. Pass it under water and use a sponge if necessary. Let it dry completely for 24 hours before reinstalling it.
Replace the foam filter of the dust container every 6 months.
Replace the anticalc filter (located behind the water tank) every 3 months. It is important to respect this 3-month period in order to maintain the durability of your appliance.
You can wash the wipes either with tap water or in the washing machine at 40°C.
Caution: Allow the wipe and its holder to cool down after using the appliance to prevent burns.
• The tube or hose is partially blocked: unblock them.
• The dust collector is full: empty it and clean it.
• The dust collector is not properly fitted: re-position it correctly.
• The suction head is dirty: remove the power-brush and clean it.
• The foam motor protection filter is full: clean it.
• Your device is not connected to the power supply: check that the power cable is properly connected and that the on/off button is turned on.
• The water tank is empty: fill it.
• The antiscale cartridge is incorrectly installed: reposition it correctly.
• The absorption nozzle is not immersed: shake the water tank to immerse the nozzle.
• The dust container is full: empty it.
• The filter is missing or incorrectly installed: clean the filter and install it correctly.
You are in 'Max' position. Reduce the steam power.
The wipe is saturated. Clean it.
The portable steam cleaner is not properly connected. Check the condition of the connectors and the proper mounting of the portable steam cleaner.
The wipe is too wet.
Clean it, use the 'Eco' steam position or install a new wipe.
You are using chemical descaling products or additives in the water tank.
Never add any products to the water tank. Contact an Approved Service Centre.
Accessories are clogged or there is no cleaning mode selected.
Change the accessories and select the 'Eco'/'Max' position, then press the steam button.
Limescale builds up on the heating element. Check if the appliance works without the flexible hose and its accessories.
In that case, change the flexible hose and/or its accessories. Otherwise, contact the Consumer Service or go to the nearest Authorized Service Centre.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.

Consumerservices